Everything-Virtual

Category: formatwithmbr

  • Installing ESXi 6 with BlackListed Drivers – Net55-r8168

    My lab is in constant turmoil, it’s a fresh installation every couple of months, back when I was labbing with vSphere 5.1 it wasn’t much of an issue installing the native ESXi 5.0 or 5.1 ISO to the Shuttle SH67H3 chassis that makes up the backbone of my lab (I run 3 of them). When VMware released vSphere 5.5 around 18 months ago they removed the drivers for the Realtek r8168 and r8169 NICs (amongst others) and this caused an issue during my first rebuild (rather than upgrade which kept the original 5.1 driver).

    Move forward to the vSphere 6 launch and VMware have gone one step further and not only kept the driver out of the release but have now gone and blacklisted the driver, so if you had it installed on your 5.5 installation and carried out an upgrade you’re going to be disappointed because ESXi6 prevents installing the older 5.1 drivers via blacklisting (more information can be found over at the excellent @VFrontDe website).

    Now Andreas has gone a step further and created a new driver bundle and placed it on his vibsdepot site and it’s well worth downloading.

    Now I have to admit that I cheated when it came to installing the new vib in to the ESXi 6.0 media, rather than using his ESXi-Customizer-PS utility I simply used his older ESXi-Customizer tool instead, yes it’s been deprecated but actually it still works and it created the ISO using the download ISO rather than requiring the offline bundle.

    Carried out the installation following my VMware Workstation 11 post to ensure that the formatwithmbr setting was used to ensure that the USB drive didn’t turn itself back to Read-Only but apart from that the whole process was simple to do thanks to the hard work that Andreas has done.

  • Installing ESXi to a USB key using VMware Workstation 11

    This is an updated post covering VMware Workstation 11 instead of Workstation 9, it’s been updated to cover installing using the formatwithmbr switch during the initial boot process as well as highlighting an issue with creating multiple USB keys from the same VM template.

    This is still the the quickest and easiest method for me to install ESXi on to a host with no local CD\DVD drive.

    Continue to read after the break for the updated build \ preparation process.

    (more…)

  • SanDisk Cruzer Fit – Write Protect on ESXi 5.x – Fix

    I recently came across an issue with my home lab that indicated I had an issue with my Cruzer Fit going to a Write Protect mode, doing a search online showed that a number of people were also exhibiting the same kinds of issues but this wasn’t being restricted to SanDisk Fit drives.

    I have been a fan of the Cruzer Fit for a while now, it’s sleek size meant that prying little fingers (I have a two year old who loves to investigate) can’t pull it out and lose it and it looks great on the front of my Shuttle SH63H3 cases so I was a bit alarmed to realise that I may have to replace these with another brand of drive that may not offer me the same flush fit as the Cruzer Fit.

    One thing I have to mention is that my usual method of installing ESXi in to my lab environment usually involves using VMware Workstation to create a VM, attaching a USB drive to the laptop and then attaching that to the VM, hey presto you have a readily available way of installing ESXi on to a system that doesn’t have a CD\DVD drive fitted. The reason I mention this will become clearer later on in the article.

    Now I should mention that the original lab build was done on VMware ESXi 5.1 and I blogged about how to upgrade from 5.1 to 5.5 here, during that time I haven’t really had much need to make changes to my ESXi environment and didn’t take note as to if\when the SanDisk Cruzer Fit drives I was using in my environment went to read-only but I know it has to have been after the 5.5 upgrade.

    Now how did I know that the drives had gone to a write protect mode? well carry on after the break to find out.

    (more…)